Product Description
Efficiency class IE3 motors
We are committed to energy efficiency and are constantly researching and designing to improve the performance of our pumps. We strive to move all our equipment into higher efficiency classes, using permanent magnet synchronous motor technology wherever possible.
Although motors fully integrated into the equipment are not covered by the EU Directive 2005/32EC, Fagiolatti has updated the product, the FS series submersible pumps are fully manufactured with IE3 super-efficient motors, with class F insulation, designed to be controlled by frequency converters, so that the performance of the whole equipment can be better managed, resulting in a significant reduction in operating costs.
Superior water cooling system
Whether in the water or dry installation, the pump in the operation process, through the water cooling system to reduce the motor and stator heating, effectively ensure the efficiency of the motor, the pump can be reliable and safe operation.
Quality of materials used
low magnetic loss metal plate
High copper purity
Silicone cable (180C) and hot crimped/copper soldered connections
Anti-clogging impellers
More than 60% of pump-related failures are directly due to clogging. This problem has not improved in recent years. Although the design of impellers has improved considerably, the requirement to reduce energy consumption and changing personal hygiene habits have also increased the risk of clogging.
New impeller concept
The Fagiolatti submersible sewage pumps have a new impeller concept: reinforced anti-clogging. A greater safety factor and market-leading clogging performance with better debris handling. This solution not only makes better use of the tried and tested anti-clogging designs, but also adds a new feature to ensure that the solids free passage can pass waste such as fibers from cloths, personal hygiene products, etc. with a diameter of no less than 80% of the outlet diameter, thus further enhancing the pump's clogging performance.
We are confident in our design because we have conducted over 5,000 man-hours of clogging tests, which allowed us to understand the contents of the effluent to benchmark the existing design and optimize the impellers used in the Fagiolatti FS series.
Superior debris handling
Provides a product with a lower risk of clogging on the market
Reduces the risk of contamination from overflows
Reduces the risk of customer service interruptions
Reduced failure costs
Reduced tank truck transportation costs
Optimized hydraulic design with CFD technology
The FAGGIOLATI range of optimized impellers, using CFD technology, matches your precise needs, providing you with better efficiency and reliability. The strategy used is a combination of Design of Experiments [DOE] and CFD. DOE is able to efficiently analyze multiple design parameters, and the end result is a series of impellers optimized for a wide range of applications.
Total efficiency includes.
-Motor efficiency
-Hydraulic efficiency [pump efficiency].
When trying to achieve a balance between the risk of clogging and energy consumption, the first step should be to select the more economical available motor efficiency. The reason for this is that the total motor efficiency is higher only if there is no risk of blockage.
The advantages of using this motor include
No risk of clogging
Recognized international standards
Long-term reliability
Reduced risk of contamination from overflows
Reduced risk of customer service interruption
Reduced failure costs
Reduced tank truck transportation costs
Lower maintenance costs
More energy efficient
Reduced energy consumption and carbon emissions
Reduced motor heating [DeltaT min. 45 "C max. 80°C].
Optimized shaft temperature for long term continuous operation
Superior immunity to interference
Superior chip handling
Offers a lower risk of clogging than any other product on the market.
Reduces the risk of contamination from overflows Reduces the risk of customer service interruptions Reduces the cost of downtime Reduces the cost of tanker transportation
Designed for the future
Complies with laws and regulations set for conventional motors in the U.S. and other countries Impeller design based on future effluent content
High reliability ensures that overflow reduction targets are met
Sustainability in manufacturing and operation
Extended pump life
Reduced maintenance costs through adjustments rather than repairs
FAQ
Quality Assurance
At Faggiolati Fluid Equipment (Wuxi) Co., Ltd., we prioritize quality and customer satisfaction. We ensure the highest quality standards by providing a pre-production sample before mass production and conducting a final inspection before shipment.
Product Range
Choose from our extensive range of reliable pumps:
- ICJ standard chemical pump
- IZA chemical process pump
- ICZ chemical process pump
- ICPD multi-stage centrifugal Heart pump
- 2BE1 vacuum pump
- QS large submersible pump
- ZMJ slurry pump
- TLB desulfurization pump
- ZXB self-priming pump
- ICY submerged pump
- OSJ split pump
- ICF ***-lined pump
Services
At Faggiolati Fluid Equipment, we are dedicated to meeting your needs. We offer a wide range of services:
- Accepted Delivery Terms: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF
- Accepted Payment Type: T/T, L/C, D/P, D/A, MoneyGram, Credit Card, PayPal, Western Union, Cash, Escrow
- Language Spoken: English, Chinese, Russian
How to Get a Quote
To ensure the fastest feedback and accurate quotation, please provide us with the following information:
- Inlet diameter
- Outlet diameter
- Working conditions
- Head (m)
- Particle size & content
- pH
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}