Product Description
This product is widely used in urban water supply and drainage, urban water supply, central heating systems and drainage, iron and steel metallurgy companies, oil refineries, paper mills, oil, power plant, airport construction, chemical plants, textile mills, sugar mills, chemical plants, power plants and drainage, plant mines consumer drainage systems, air conditioning systems of water supply, agricultural irrigation, drainage and various water projects.
End-suction pump is single-stage single-suction (axial suction) cantilever centrifugal pumps, conveying corrosive liquid with viscosity similar to water without solid particles. Mark, rated performance and size in accordance with international standards ISO2858, with characteristics of a wide range of performance, high efficiency and easy maintenance, the efficiency of an average 5 percent up compared with F-type pump, is the international promotion of energy-saving products.
The transmission medium temperature chemical pump is -20 ºC ~ 105 ºC, can transport medium with a higher temperature with better cooling measurement if necessary , suitable for chemical, petroleum, metallurgy, electric power, paper, food, pharmaceutical and synthetic fiber industries, for transport all kinds of corrosive media similar to water without pollution.
Main design features
Suitable for high-pressure applications with flanges in PN 10 and PN 16
"Back pull-out" design makes it possible to remove hydraulic parts without having to remove the pump body from the plant pipes
Dynamically balanced closed impeller to minimize radial loads and provide smooth rotation of impeller
Suction profile designed to reduce NPSH for trouble-free operation in demanding conditions
Stainless steel shaft designed to withstand the bending-torsion load
Oversized ball bearings provide reduced working noise and a long service life
Large selection of mechanical seals or gland packings (SES) configured according to the requirements of the fluid characteristics and conditions of use
| Pump Speed |
1450 and 2950rpm; |
| Motor Voltage |
380V/415V, 3.3KV, 6KV and 10KV; |
| Caliber |
50-400mm;(flange dimensions conform GB/T17241.6-1998) |
| Flow range |
6-1000m3 / hr |
| Head range |
6-130m; |
| Temperature range |
Medium maximum temperature ≤170'C, ambient temperature ≤60'C; |
| Maximum operating pressure (inlet pressure + pump pressure) |
1.0Mpa (G) (Hsp75m) or 1.6Mpa (G) (Hsp75m);Special configuration of up to 2.5Mpa (G); |
| Transmission medium |
Water or other liquids physical and chemical properties similar to water; |
| Seal plumbing parts |
No installment when inlet pressure above 0.03Mpa (G) |
| Structural Design |
29 basic types, of which 22 pairs speed (1450rpm, 2900rpm) through A, B with two forms of the impeller diameter cutting variants, reaching 112 specifications. |
High-precision casting impeller can ensure the performance, material in cast iron, stainless steel and bronze.
In order to balance axial thrust, there are both wear rings in front and at the back of the majority of the impeller and the balance hole is on the back shroud of the impeller. The axial thrust of some pumps is not big enough, so there is no wear ring and balance hole at the back of the impeller.
Packing pump cover is equipped with stuffing, for soft packing seal, the stuffing may pass into a certain pressure of water for seal cooling, lubrication, cleaning;
Single mechanical seal and double mechanical seal two species for mechanical seal, a certain pressure into the seal cavity through the water, rinse the end surface friction, while cooling effect. According to demand while allowing the use of a sealed cavity adapted to form a predetermined size of ISO3069 other structures, such as mechanical seal with corrugated pipe and expeller seal.
Flexible couplings
Unlike rigid couplings, flexible couplings can accommodate some movement e.g. vibrations and thermal expansion without damage. This makes them ideal for applications where there is a degree of unavoidable misalignment between the drive and pump shafts. As they can absorb vibrations well, they can also be used to reduce excessive operating noise. With these benefits come a more complex, expensive design. However, as flexible couplings protect the shaft and bearings from damage and premature wear, there are maintenance savings to be had in the long run.
We use wear-resisting disc coupling or pin coupling.
Ordering Instructions
1.Please provide the following information when placing an order
★ Pump mode or working conditions data:capacity,head and NPSH(net positive suction head)ect
★ Medium:working temperature,corrosive or other physical&chemical properties(temperature)>80ºC,cooling structure will be adopted for bearing,the material of casing&cover is QT500-7)
★ Pump inlet pressure
★ Type of shaft seal(Users have three choices:non asbestos soft packing,mechanical seals and injection type soft packing.if not to specify it,mechanical seals will be supplied.)
★ Direction of rotation(Counterclockwise rotation is special.if not to indicate direction,clockwise rotation is to be provided.)
★ Parts material(If not to specify material,pump will be supplied according to standard material )
★ Motor requirement:power,voltage,protection class,insulation class,cooling method,anti-explosion or not etc
★ Common base(standard configuration:when motor support number≤315 and pump suction diameter≤350,scope of supply shall include common base.beyond the above scope,it is necessary to specify whether you need pump base or common base when ordering)
2.Model selection instructions
★ The order is not limited by the performance parameters list.data in the catalogue is only special point parameter,we can design and manufacture the product according to the user requirements
★ If selected model is close to performance parameters,generally standard impeller pumps and high speed pumps are preferred.(to select high speeds pumps,NPSH shall meet the requirements)
★ For specific speed of 40,60 and 90 low specific speed pumps, if selected product is not running on large flow and low head operation conditions,motor can be calculated according to the actual operating points and appropriately reduced
★ Pump can be of speed down running,but generally exceeding rated speed acceleration running is not allowed
Payment Term
| Payment Terms |
T/T |
EXW |
50% T/T in advance, the balance to be paid before dispatch |
| FOB |
| CIF |
50% T/T in advance, the balance to be paid against the copy of B/L |
| CFR (C&F) |
| L/C |
Irrevocable L/C at sight could be accepted if amount above US $50,000.00 |
| Delivery Time |
30-45 days after receiving advanced payment |
FAQ
1. When can I get the quotation?
We usually quote 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
2. Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your idea and we will help to carry out your ideas. It does not matter if you do not have someone to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.
3. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 30 to 45 days(Except for the selected brand).Generally speaking, we suggest that you start inquiry two months before the date you would like to get the product at your country.
4. What is your terms of delivery?
We accept EXW, FOB, C&F and CIF, etc. You can choose the one which is the most convenient or cost effective for you.
Audited Supplier 
){kind=link}