Water-Cooled High Voltage Electric Motor for Large Applications

• Customization: Available
• Application: Industrial
• Operating Speed: High Speed
• Species: Y Series
• Rotor Structure: Winding Type
• Casing Protection: Explosion-Proof Type
• Number of Poles: 2,6,8,12
• Starting Mode: Auto-induction Voltage-reduced Starting
• Certification: ISO9001, CCC
• Brand: Faggiolati
• Voltage: 3kv/6kv/10kv/Customized
• Phase: Three Phase
• Temperature: - 15~40 Degree
• Protection Feature: IP54/IP44/IP23
• Working Condition: Not Exceeding 1000m Above Sea Level
• Cooling Method: IC611/IC81W/IC01
• Insulation Class: F Class
• Transport Package: Wooden Box
• Specification: IEC standard
• Trademark: FAGGIOLATI
• Origin: China
• HS Code: 8501510090

Product Description

Product Description

Our products strictly enforce the IEC motor production standards, and after ISO9001 quality management system of strict quality control, to ensure that my company's high-quality products. My company's products in many areas have been the majority of customers praise.

Here we briefly introduce my company's products

Motor frame
Motor frame: the use of domestic high-quality 45 # steel plate welded processing, with surface processing size tolerance should be less than 0.01mm, to ensure that the mechanical properties of the motor.
 
Motor spindle
Spindle material forged 45A steel. After quenched and tempered after rough car, fine car, washing, grinding and other processes from processing, to ensure the overall mechanical properties of the spindle and precision tolerance size.

Stator rotor core
(1) fixed rotor core is the use of low loss, high permeability, high stacking coefficient, the surface of the insulating film adhesion and good weldability, no time, the thickness of 0.5mm electrician high-quality grain non-oriented cold rolling Silicon steel sheet laminated. Cold rolled silicon steel sheet performance indicators should not be less than GB2521-88 requirements, the material used by the performance of not less than 50W310. Each piece of silicon steel sheet should be no burr, both sides coated with F-class insulation material paint to reduce the eddy current loss.
(2) fixed rotor core ventilation groove layout so that the air flow smooth and smooth, so that the stator core is fully cooled, the wind resistance loss is small.
 
Stator winding coil
Stator winding coil using domestic high-quality manufacturers to provide the F-class insulation grade enameled wire or double glass fiber flat copper wire wound around. In the manufacturing process after several inter-turn pulse voltage test and ground pressure test.

The stator rotor winding is embedded in the core  
The stator rotor winding: 100% pure copper flat copper bending, F-class insulation mica wrapped.

Stator rotor winding wiring
In the manufacturing process with silver copper argon arc welding, and with F-class insulation mica will be welded at the package so the motor insulation performance is excellent and reliable, good mechanical strength, moisture resistance.
 
Stator winding rotor winding vacuum impregnation
Using foreign advanced vacuum pressure impregnation solvent-free paint equipment and process (VPI) treatment. Has a good anti-corona and anti-corrosion resistance, in the groove, the end of the site to take anti-halo measures.
Therefore, the motor insulation performance is excellent and reliable, good mechanical strength, moisture resistance.

Rotor fine processing and dynamic balance check
Rotor fine processing to ensure the stability of the stator and rotor between the uniform
Dynamic balancing checks ensure good mechanical performance of the motor. 
 
Machine assembly and experiment
experimental projects
Mechanical inspection/Determination of DC resistanceDetermination of insulation resistanceNo load testDetermination of vibration and temperature riseDetermination of open circuit voltage of rotorStall testWinding to ground pressureTurnstrap test30KV DC leakage test.

Feature

The YRKS large-scale motor is a high-voltage wound-water-cooled three-phase asynchronous motor. The power class, installation dimensions and electrical performance of this type of motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
YRKS large slip ring motor bearings are divided into two types, rolling bearing and sliding bearing, depending on the motor power and speed. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
YRKS large water cooler motor addition set, bearing temperature measuring device, can also add heating device inside the motor, the shaft extension of the motor uses the tangential key, the motor carbon brush is not lifting structure, the front and rear bearing chambers of the motor have Oil filling and oil draining device.
YRKS large slip ring motor can be used to drive various kinds of machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants and other industrial and mining. Used as a prime mover in an enterprise. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.

Center height range: H400 ~ 1000mm
Power range:200kW ~ 12000kW
Number of poles: 4/6/8/10/12
Rated voltage: 6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC81W
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Comparison of different series High Voltage motors

No.	Squirrel-cage motor	Y JS	YKK	YKS	Y2, Y3
	Slip ring motor	YR JR JR2	YRKK	YRKS	YR2, YR3
1	Structure	Box-type construction, made up of steel plates welded with each other			Compact struction
2	Cooling method	IC01 or (IC11, IC21, IC31)	IC611 or IC616	IC81W	IC411
3		Natural ventilation, with top mounted protection cover	With top mounted air-air cooler	With top mounted air-water cooler
4	Protection type	IP23	IP44 or IP54	IP44 or IP54	IP54
5	Insulation	F
6	Mounting arrangement	IMB3
7	Voltage available	380 v, 2400 v, 3kv, 3.3kv;  4160 v,    6kv, 6.6kv;      10kv, 11kv
8	Frequency available	50Hz , 60Hz

High efficiency
Energy-saving
Low Noise
Low vibration
High start torque
Low start current
Light weight and reliable performance
Easy for installation and maintenance

Detailed Photos

 

Company Profile

FAGGIOLATI Wuxi is an innovative and efficient supplier of fluid equipment. The company's quality management system fully meets the requirements of ISO90001 quality system certification, ISO14001 environmental system certification and OHSAS18001 safety system certification and has obtained the Chinese national certification.
We are committed to providing high-end technologies and services that improve water, air and the environment around the world, innovating for the benefit of our customers, satisfying them and benefiting our employees.