Description
The evaporation crystallization circulating pump is a large flow, low head axial flow pumpsuitable for evaporation and concentration in industries such as diaphrag caustic soda, phos-phate fertilizer, alumina, Qinbai powder, chlorinated calcium, calcium chloride sugar, salt, papermaking, wastewater, etc.
Good anti cavitation performance: suitable for low liquid level evaporators, greatly reducing investment in evaporation plants, lt is also suitable for new evaporators equipped with high fluidresistance heating chambers on the pump inlet side (reverse circulation evaporators, double heating chamber series evaporators .High pump efficiency and wide efficiency zone: By changing the installation angle of the bladesand changing the speed,it car meet the user's requirements for flow and head and ensure thatthe operating conditions of the pump are within the pump efficiency zone, with significant ener-gy-saving effects.Slow speed type: The pump runs smoothly: Light wear and long service life of overcurrent compo-nents; Low crystal damage, suitable for evaporative crystallization process cantilever rotor:Compared with double support type, the number of shaft seals is reduced by half, the pump weightis light, the overall size is small, anc maintenance is convenient, Pump body center support:Compared to the pump body foot support type, the rotor is thermally neutral. Rear door structure:Without disassembling the inlet and outlet flanges of the pump body, the rotor can be extractedmaking maintenance convenient and fast. Advanced shaft seal: using container ized machine seal,with a lifespan of 6-12 months; Sea with a new type of liquid blocking packing, with a packingife of 3- months Evaporator without expansion joint: can be used as an elastic pump base or asuspended purp, with reliable therma compensation and reduced evaporator investment The wholemachine is reliable: the pump shaft has high strength, the bearing capacity is large, the bearingseat has a water-cooled sleeve, the shaft seal has a long service life, and the mater ial perfor-mance is good, ensuring the long-term operation of a single pump.
Transmission mode
Direct connection: The pump and motor are directly connected through a flexible coupling (code D)Belt transmission: Through triangular belt transmission, it is easy to adjust the pump perfor-mance by changing the speed (code V)Reducer: Reduce speed through gearbox, suitable for high power pumps (code G)
Performance range
Caliber:350-900mm
Flow rate:800-10000m3/h
Working pressure:<0.6MPa
Working temperature: <250'C
Lift:2-8m
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}