| Customization: | Available |
|---|---|
| Application: | Industrial |
| Operating Speed: | High Speed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The power level, installation dimensions and electrical performance of the HV high-voltage slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The bearing of HV wound rotor slip ring motor has two types of rolling bearing and sliding bearing, depending on the motor power and speed. If the motor has a high degree of protection, the protection level of the bearing will also increase. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
HV winding rotor slip ring motor main outlet box is IP54 protection grade, generally installed on the right side of the motor (facing the motor shaft extension end), can also be installed on the left side of the motor according to the order requirements. Inside the main outlet box, outside There are separate ground terminals.
HV winding slip ring motor increases the setting and bearing temperature measuring device. It can also add heating device inside the motor. The shaft extension key of the motor generally adopts the tangential key, and the motor carbon brush is not lifting structure.
HV wound rotor slip ring motor can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants, etc. Used as prime mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP23 or IP44
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC01/IC611
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor)
FAGGIOLATI Wuxi is an innovative and efficient supplier of fluid equipment. The company's quality management system fully meets the requirements of ISO90001 quality system certification, ISO14001 environmental system certification and OHSAS18001 safety system certification and has obtained the Chinese national certification.
We are committed to providing high-end technologies and services that improve water, air and the environment around the world, innovating for the benefit of our customers, satisfying them and benefiting our employees.
){kind=link}